To obtain a well-matched gear motor, start by choosing a gearbox that will provide the right speed and torque output for the application, and then select the appropriate motor to meet output performance. Once the motor has been selected, a calculation needs to be made for the actual speed, torque and efficiency. Assuming the Motor and …
The brushless DC geared motor, namely the BLDC geared motor, is based on the brushless DC motor with a matching gear reducer. The function of the gear reducer is to provide a lower speed and a larger torque. Obviously, different gear motors can provide different speeds and torques. This greatly improves the usage rate of …
How Does the Brushless DC Gear Motor Decelerate? Read More »
ATO gear motor is a widely used deceleration drive equipment, which is widely used in automatic industrialization, robot drive, communication equipment, medical equipment, automobile drive, electronic products, logistics equipment, etc. Different models, specifications and parameters of geared motor application equipment have different scenarios. The following details how to choose gear motors and pay attention to …
As a traditional transmission device, the worm gear reducer has a worm gear inside and the tooth profile is involute. Many users do not know enough about worm gear reducers. Gearmotors will come with you to understand the installation tips of the worm gear reducer. Mount the unit to a rigid flat surface using grade …
Gear drives deliver power to industrial equipment such as bulk material conveyors, mixers, pumps and paper mills. The reliability that translates into greater uptime and profitability begins by specifying and selecting the proper gear drives for these critical applications. The choice of a gear drive depends on the application, its environment and the physical constraints of the system. The gearbox geometry is defined …
This article will introduce you to how to choose the torque of the reducer. The previous post has already introduced the tips for a geared motor. Before starting the preliminary design, the following factors must be known. The type, powers and speeds of the prime mover. The overall ratio of the gearbox. The types of …
Improve the vent cap and inspection hole cover. Try to balance the internal and external pressures to prevent oil leakage. Although the geared motor has a vent cap, the vent hole is too small and easily blocked by coal dust and oil. Open the inspection hole cover every time you refuel to increase the possibility …
The gear motor should pay attention to the installation site. It requires the ground to be flat and the ventilation conditions to be as good as possible. The installation site will have a great impact on the use of the geared motor in the future. The following points should be paid attention to when using …
The choice of the installation position of the reducer. If there is a safe environment, try not to use vertical installation. During vertical installation, the amount of lubricating oil added is more than that used in the horizontal installation, which is easy to cause heat and oil leakage of the reducer. ATO DC worm geared …
Worm gearing has a high slide-to-roll ratio when compared to other types of gearing. Because of a high sliding component, it relies heavily on the generation of an oil film between the worm and gear. The oil film produces an effect similar to what happens when a speeding car hits a rain puddle. The car tire has a tendency to float on …
