3 W – 20 W single-phase AC gear motor & torque motor can act as a brake when back drove, or a simple device to provide tension. A high-performance torque motor with a gear ratio from 3 to 200 is an excellent product for winding and unwinding applications.
Torque Motor Specifications
Phase
Single Phase
Power
3 W – 20 W
Voltage
110/220 V
Shaft Type
Pinion Shaft
Gear Ratio
3 – 200
Rating at Locked Rotor
5 Min Continuous
Frequency
50/60 Hz
Model Selection
Model
Power
Starting Torque
Weight (motor with gear head)
ATO-GEAR-TM3
3W
69 mN.m
1.15kg
ATO-GEAR-TM6
6W
134 mN.m
1.6kg
ATO-GEAR-TM10
10W
235 mN.m
2.4kg
ATO-GEAR-TM20
20W
363 mN.m
3.75kg
Wiring Diagram
Tips for using a torque motor with a gearbox
The torque motor has the characteristics of high starting torque and inclination. The speed control can be realized by changing the power supply voltage.
It is suitable for winding applications. In applications where an object is continuously released at a constant speed and wound at a constant tension. If the diameter of the winding spool is doubled, the torque must be doubled and the speed must be halved.
A torque motor with a gearbox can be used as a brake. By using the speed-torque characteristics of the motor in the braking area, it can act as a brake. In addition, constant tension operation can be realized by applying DC voltage.
