Planetary gear heads are used on high precision motion control applications that require high torque to volume ratio (ranging from a factor of two to a factor of 100, depending on the ratio), high torsional stiffness and low backlash the specifics of which will vary by application. Planetary gear heads increase the torque by the factor of the gear head ratio. …
The choice of the installation position of the reducer. If there is a safe environment, try not to use vertical installation. During vertical installation, the amount of lubricating oil added is more than that used in the horizontal installation, which is easy to cause heat and oil leakage of the reducer. ATO DC worm geared …
The geared motor is composed of the gear box and the motor. The standard motor selected is a 4-pole ordinary motor. When the mechanical equipment needs a geared motor, the matching motor type should be informed in advance, so as to avoid problems in future use. For example, the occasion of lifting, parking and positioning …
Gearheads are sometimes called “epicycloidal” gearheads because the points on the rotating planets trace epicycloidal curves as they turn. The term “planetary” is also applicable because the rotating action of the entire assembly about the central sun gear mimics the movement of a solar system. Planetary gear trains are being used increasingly as actuators in applications where more torque is …
The geared motor is a common power transmission mechanism, which is used in various mechanical transmission systems. The installation and use of the geared motor are directly related to the operating effectiveness of the geared motor and must comply with technical specifications and standards. The reasonable installation and use of the geared motor should pay …
The planetary gear is one of the epicyclic gear, which is a gear system consisting of one or more outer gears, or planet gears, revolving about a central, or sun gear. And it can be wildly used in industry, such as printing lathes, automation assembly, semiconductor equipment, and automation system. Since its commercial value, our project is …
Using only the motor size and speed analysis can be problematic because most applications require a specific speed and or torque to meet the overall power requirements of the application. To keep the ideal package size, a gearbox with a motor can be used to reduce the speed and increase the torque to meet design parameters. It …
1. There is a bump on the tooth surface of the gear, causing the noise. Situation: The sound frequency is stable, there is abnormal sound in one direction, and there is no abnormal sound in reverse rotation. The specific location of the abnormal sound can be determined by calculating the frequency relationship between the rotational …
Before using, read safety precautions carefully and use products properly. For the suggestions on using, they are classified as caution and warning. 100W – 3.7kW three-phase AC geared motors and DC geared motors can also be followed. Caution Warning – Make sure to check whether the things are what you ordered. If you install the …
Factors that contribute to gear head noise include input speed, gear head ratio, output torque, radial and axial loads and mounting errors. Noise Following the proper mounting procedure is critical to minimizing noise and maximizing performance. Many gear heads need to be mounted to the servo motor in a vertical orientation first. This allows the motor shaft to …
